Release time:2023-11-18 17:15:46 Hits: Current position: Home > News
This article mainly introduces:
Croatia hydraulic cylinder,stacker cylinder manufacturer,stacker cylinder(Croatia stacker cylinder,produced by Hengyu Group)
stacker cylinder are widely used in Croatia,because of powerful torque,clever hydraulic energy conversion,simple structure and reliable operation.So our company has designed stacker cylinder for customers from Croatia.
When the stacker cylinder needs to be disassembled for maintenance due to leakage and other faults, the piston should be moved to the bottom position of the stacker cylinder, and hard beating and sudden drop are strictly prohibited during disassembly.
The definition of the minimum stable speed refers to the minimum movement speed of the stacker cylinder without crawling phenomenon when the full load is moving, it has no uniform indicator, and the stacker cylinder that undertakes different work has different requirements for the minimum stable speed.
stacker cylinder daily maintenance, should focus on checking whether the piston rod surface roughness and shape and position tolerance meet the technical requirements, if the piston rod bending should be calibrated to meet the requirements or according to the physical mapping, manufactured by a professional manufacturer. If the piston rod surface coating wear, slip damage, local spalling can be adopted to remove the coating, re-chrome surface processing process.
The scar on the sliding surface of the stacker cylinder piston will transfer with use. Before the piston is installed, there are scars on its sliding surface, which are installed intact and untreated, and these scars will in turn scratch the inner surface of the stacker cylinder wall. Therefore, before installation, these scars must be fully repaired.
How many kilograms can the 63 cylinder hold?
The force of the cylinder is related to the cylinder diameter and pressure. 63 cylinder diameter (cylinder inner circle diameter), 21MPA pressure, thrust 6 tons.
How to disassemble the big nut that excavate the oil cylinder piston of the excavator?
If you want to be safe, look for a special unloading place for this thing, which is an oil cylinder on top of a turntable with a large nut attached to the center of the turntable. If you're in the field just pin the head of the cylinder to one end, use a big homemade wrench to hold the nut in place, and then get a digging machine and push it down, and it opens.