Release time:2023-11-07 17:47:36 Hits: Current position: Home > News
This article mainly introduces:
Finland hydraulic cylinder,vehicle hydraulic cylinder manufacturer,vehicle hydraulic cylinder(Finland vehicle hydraulic cylinder,produced by Hebei Hengyu company)
vehicle hydraulic cylinder are widely used in Finland,because of clever hydraulic energy conversion,simple structure and reliable operation,excellent temperature resistance.So our company has designed vehicle hydraulic cylinder for customers from Finland.
vehicle hydraulic cylinder head explanation: low pressure castings, medium and low pressure with HT300 gray iron, medium and high pressure with 35, 45 steel. When the vehicle hydraulic cylinder head itself is the guide sleeve of the piston rod, the vehicle hydraulic cylinder head is best cast iron. At the same time, brass, bronze or other wear-resistant materials should be fused on the guide surface. If the guide sleeve is pressed into the vehicle hydraulic cylinder head, the guide sleeve shall be wear-resistant cast iron, bronze or brass.
In the case of serious wear on the inner surface of the vehicle hydraulic cylinder, or when there is a deep longitudinal tensile mark, it should be mapped according to the physical object and re-produced by the professional manufacturer according to the vehicle hydraulic cylinder manufacturing process for replacement. The vehicle hydraulic cylinder can also be repaired with TS311 antiwear repair agent. TS311 anti-wear repair agent is mainly used for the repair of worn and slipped metal parts.
When the vehicle hydraulic cylinder is customized, if there are high requirements for the quality of the vehicle hydraulic cylinder, it is best to use rolling processing, because the surface layer has surface residual compressive stress, which helps to close the surface of the small crack, preventing the expansion of erosion. Thus, the corrosion resistance of the surface can be improved, and the fatigue crack can be delayed or expanded, and the fatigue strength of the vehicle hydraulic cylinder can be improved. By rolling forming, a cold working hardening layer is formed on the rolling surface, which reduces the elastic and plastic deformation of the contact surface of the grinding pair, thereby improving the wear resistance of the inner wall of the vehicle hydraulic cylinder and avoiding the burn caused by grinding. After rolling, the reduction of surface roughness value can improve the matching property.
When purchasing the vehicle hydraulic cylinder, try to clarify the following parameters of the vehicle hydraulic cylinder: A. vehicle hydraulic cylinder diameter, rod diameter, stroke; B. Working pressure or vehicle hydraulic cylinder load; C. Working environment temperature; D. Working medium; E. Operating speed; F. Other parameters, such as connection form, mounting size, etc. In this way, the right vehicle hydraulic cylinder type can be found accurately and quickly.
When the superimposed hydraulic control valve is added to the bottom of a solenoid valve and a double directional throttle valve, why does the cylinder shock on the return trip?
The stack hydraulic control check valve must be added above the stack one-way throttle valve.
What diameter cylinder is needed for a force of 5 tons?
It depends on the pressure of your system pump. If the normal working pressure of the system is about 8MPa, then the diameter of the cylinder should be 100 mm.